BMW E90 E91 E92 E93 Aftermarket Stereo Install
How to remove the BMW E90 E91 E92 E93 Radio?
It is best to put a towel on the center console to avoid any accidental scratches during work.
Carefully use the decorative removal tool to pop the decoration around the HVAC control, be careful and use the towel when needed so that no plastic is damaged.
Unplug the HVAC controllers, which use a small rotating lever to push the plug out of the controller. If your car has a second row of buttons under the HVAC, loosen and unplug these buttons.
Unclip the HVAC control unit from the surrounding trim.
Remove the two screws under the stereo, pull it out and unplug the power cord.
Remove the screw that secures the radio bracket in the instrument panel and pull the bracket out.
How to installation new BMW E90 E91 E92 E93 car stereo?
1) Connect the wiring harness to the back of the new car radio.2) Connect the Android car stereo to the original car radio plug.
3) Put the new Gizok car stereo in the dashboard.
4) Turn on the new car radio and check that it works. If not, check that all cables are properly connected.
5) Fix all screws and panels to original position.